英语翻译
英语翻译
The crater wear generally is measured at a distance of half the depth of cut from the tool nose while machining materials like steel.But in machining materials like Ti-6Al-4V,the crater wear is not only intensive but also irregular in depth with adherent deposits of work material.
This requires scanning of the entire crater area to characterise crater wear.In the present study,the crater depth has been measured using Taylor Hobson NCS Profilometer.Fig.3 schematically shows the scanning of the crater area.
The crater areas on the tool thus scanned were mapped in
2D and 3D on computer using Taly lltra software.Fig.4shows one such mapping.The profile and the maximum crater depth were obtained from the 2D mappings.
Fig.5(a–e) show the measured depth of the crater,KT and the corresponding crater profile at different machining intervals at cutting velocity – feed combination of 85 m/min–0.20 mm/rev under all machining environments.
The crater wear generally is measured at a distance of half the depth of cut from the tool nose while machining materials like steel.But in machining materials like Ti-6Al-4V,the crater wear is not only intensive but also irregular in depth with adherent deposits of work material.
This requires scanning of the entire crater area to characterise crater wear.In the present study,the crater depth has been measured using Taylor Hobson NCS Profilometer.Fig.3 schematically shows the scanning of the crater area.
The crater areas on the tool thus scanned were mapped in
2D and 3D on computer using Taly lltra software.Fig.4shows one such mapping.The profile and the maximum crater depth were obtained from the 2D mappings.
Fig.5(a–e) show the measured depth of the crater,KT and the corresponding crater profile at different machining intervals at cutting velocity – feed combination of 85 m/min–0.20 mm/rev under all machining environments.
英语人气:615 ℃时间:2020-02-03 23:09:11
优质解答
加工像钢这类材料时,凹坑磨损在距离刀尖半个切削深度处测量.但在加工Ti-6AI-4V这类材料时,凹坑磨损不仅强烈,而且深度是不规则的,带有工件材料的粘附沉积物.这就要求对整个凹坑区域进行扫描,确定凹坑磨损的情况.在本...
我来回答
类似推荐
猜你喜欢
- 1我应该向左转还是向右转,用英语怎么说?
- 2为什麽电流会选择没有用电器的导线?
- 3请问谁知道英语中的much,many 和a lot of 的用法区别,
- 4将质量相同的实心木球和铝球放入水中,铁球悬浮在水质那个,铝球漂浮在水面,则
- 5我妈妈不在家,她在工作.翻译英文
- 6五位同学有同样多的存款,在“抗震救灾”捐款中,每人捐出16元后,五位同学剩下的钱正好等于原来3人的存款数.原来每位同学有存款多少元?
- 7用2100个棱长1cm的正方体堆成一个长方体,它的高是1dm,且长大于宽大于高
- 8在括号里填上合适的符号.第二个因数>1时,第一个因数( )积.第二个因数
- 9differ from和distinguish from 什么区别啊
- 10行列式1 1 1 0 0 1 0 1 0 1 1 1 0 0 1 0 用行列式的定义计算